BJHZW - ROLL-ON STAMP PAD INKER

  • MSDS: BJHZW
  • Manufacturer: SANFORD CORP
  • Product Name: ROLL-ON STAMP PAD INKER
  • National Stock Number: 7510-00N012001
Product Identification

Product ID:ROLL-ON STAMP PAD INKER
MSDS Date:01/14/1988
FSC:7510
NIIN:00N012001
MSDS Number: BJHZW

Responsible Party
SANFORD CORP
2740 WASHINGTON BLVD
BELLWOOD, IL 60104-1940
US

Emergency Phone: 800-228-5635

Info Phone: 312-547-6650

Cage: 86874

Contractor
SANFORD CORPORATION
BELLWOOD, IL 60104 US

Telephone: 1-800-323-0749

Cage: 86874

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000


GLYCERIN

CAS: 56-81-5

RTECS: MA8050000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 (MIST) 9293


DIETHYLENE GLYCOL

CAS: 111-46-6

RTECS: ID5950000


POLYETHYLENE GLYCOL

CAS: 25322-68-3

RTECS: TQ3500000


DYE

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED TOXIC
UNDER FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS, TITLE 16, PART
1500.THIS PRODUCT IS CONSIDERED SAFE WHEN USED UNDER NORMAL USE
CONDITIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGEST: CALL MD IMMED . INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ ARTF RESP) .

Fire Fighting

Flash Point Method:PMCC
Flash Point:>390F,>199C
Lower Limits:NOT AVAIL
Upper Limits:NOT AVAIL
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:WIPE UP WITH ABSORBENT MATERIAL AND DISCARD AS
SOLID WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT SQUEEZE BOTTLE. KEEP CAP ON
BOTTLE WHEN NOT IN USE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE UNDER NORMAL USE CONDITIONS.
Ventilation:NONE UNDER NORMAL USE. CONSULT LOCAL SAFETY/HEALTH
AUTHORITIES IF ADDITIONAL GUIDANCE IS NECESSARY.
Protective Gloves:NONE UNDER NORMAL USE.
Eye Protection:NONE UNDER NORMAL USE CONDITIONS.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:>550F,>288C
Vapor Pres:<0.1 @72F
Spec Gravity:1.2-1.3 @ 22C
Evaporation Rate & Reference:NOT AVALIABLE
Solubility in Water:COMPLETE
Appearance and Odor:(ALL PHYSICAL/CHEM DATA ARE FOR INGRED 2.) WATER
WHITE,CLEAR LIQUID,BLAND ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NOT AVAILABLE
Stability Condition to Avoid:NOT AVAILABLE
Hazardous Decomposition Products:NOT AVAILABLE

Disposal

Waste Disposal Methods:DISCARD AS SOLID WASTE. DISPOSAL MUST BE IN
ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.